Document Library - Sentinel Online
Sentinel-1A TOPS Radiometric Calibration Refinement
Following a calibration campaign that took place during spring/summer 2015, a new processing baseline is in place for all Sentinel-1 Level-1 core user products acquired after 25/11/2015 10:40 UTC ...
Sentinel-1 IPF: Impact of the Elevation Antenna Pattern Phase Compensation on the Interferometric Phase Preservation
The Elevation Antenna Patterns (EAPs) used by the S-1 Instrument Processing Facility (IPF) are derived from the S-1 Antenna Model (AM) which is able to predict with great accuracy the gain and ph ...
Sentinel-3 Optical User Test Data Set description
This Technical Note is aimed at describing the Sentinel-3 Optical Test Data Sets (TDS) provided to the user community and the limitations of the TDS'. No detail on the tools used for the generati ...
Sentinel-3 Test Data Set Generation report for Level 2 SRAL/MWR IPF
This document is a technical note describing the work performed in the framework of the AD 2 proposal, that is to say the generation of a Sentinel-3 Level 2 Test Data Set within the Sentinel-3 Co ...
Sentinel-3 PDGS File Naming Convention
This Technical Note provides the File Naming Convention adopted by the Sentinel-3 PDGS for the following data classes:
Instrument data products, including
- Leve ...
- Instrument data products, including
Sentinel-1 SAR Space Packet Protocol Data UnitSpecification for Level-0 products This document gives a comprehensive description of the Sentinel-1 Space Packet on packet layer level. It describes the structure of the packets, provides the data fo ...
Sentinel-1 Radiometric Calibration of Products
This document defines the procedure to radiometrically calibrate Sentinel-1 Level 1 products generated by the Sentinel-1 IPF.
Sentinels Data Product ListThe present document provides the list of the Sentinels products generated by the Copernicus Space Component (CSC) core ground segment for access by the Copernicus users.
Sentinel 5P TROPOMI Static input for Level 2 processorsThis document describes the static input data that is required by the S5P/TROPOMI level 2 processors. This includes sources for reference spectra, elevation data and surface albedo climatologies.
Tailoring of the Earth Observation File Format Standard for the Sentinel-5P Ground Segment
This technical note provides the file naming conventions and the file format adopted by the Sentinel 5-Precursor (S5P) Payload Data Ground Segment (PDGS) for multiple product classes.
Most Accessed Publications
- Upgrade from POE-E to POE-F orbit standard for Sentinel-3 mission
- Update of S-1 Instrument Timing Calibration for ETAD
- Thermal denoising of products generated by the Sentinel-1 IPF
- Tailoring of the Earth Observation File Format Standard for the Sentinel-5P Ground Segment
- Sentinels POD Product Handbook