Document Library - Sentinel Online
Guide to Sentinel-1 geocoding
This document describes methodologies to geocode Copernicus Sentinel-1 images that present themselves in a single 2-D raster radar geometry (slant or ground range). It has been written for ESA ...
Sentinel-2 L1C Data Quality Report Issue 75 (May 2022)
This document provides the status of the Sentinel-2 Level-1C product quality as it stands in May 2022. It updates the information supplied in previously issued Reports.
Sentinel-2 L2A Data Quality Report Issue 49 (May 2022)
This document provides the status of the Sentinel-2 Level-2A product quality as it stands in May 2022. It updates the information supplied in previously issued Reports.
Sentinel-1 Annual Performance Report 2021
The purpose of this document is to provide the status of the Sentinel-1 instrument and product performance for 2021.
Sentinel-1 Product Specification
This document defines the detailed product format for all Sentinel-1 Level 1 (L1) and Level 2 (L2) products.
This version of the product specification is applicable from version 3.40 of the ...
Sentinel-1 IPF Auxiliary Product Specification
This document describes the auxiliary data required by the Sentinel-1 Instrument Processing Facility (IPF) to perform L1 and L2 processing.
It defines the content and format of auxiliary da ...
Sentinel-1 Using the RFI annotations
The purpose of this document is to guide the Sentinel-1 product users on how to use the Radio Frequency Annotations (RFI) introduced by the IPF (SAR processor) v3.4.0.
The document explains ...
Sentinel-2 Level-2A ATBD
This ATBD document describes the algorithms implemented in the atmospheric correction processor Sen2Cor. en2Cor is used in the operational environment of Sentinel-2-PDGS for global processing and g ...
Sentinel-2 Products Specification Document (PSD)
This document specifies the format of Sentinel-2 products, from Level-0 up to Level-2A.
Note: The XSD schemas relative to Level-1A, Level-1B, Level-1C, and Lev ...
Sentinel-1 Ocean Wind Fields (OWI) ATBD
The objective of this document is to define and describe the algorithm implemented in the Sentinel-1 L2 IPF and the processing steps for the generation of the Ocean Wind Field (OWI) component of th ...