Sentinel 1 SAR Document Library - User Guides - Sentinel Online
-
Definition of the TOPS SLC deramping function for products generated by the Sentinel-1 IPF
This document defines the procedure for performing the deramping of Sentinel-1 TOPS IWS and EWS of Level-1 SLC products generated by the Sentinel-1 IPF.
-
Report on the debris impact on S1-A solar panel on 23rd August 2016
The present technical note discusses the debris collision that occurred on 23rd August 2016 whereby the Sentinel1-A solar panel was struck by a small mm sized particle. The implications for product ...
-
Sentinel-1A Antenna Failure - Anomaly Characterization Report
This technical note discusses the impact of the Sentinel-1A tile 11 issue that occurred during June 2016. -
Sentinel-1A Annual Performance Report 2015
The purpose of this document is to provide the status on the Sentinel-1A instrument and product performance during 2015.
-
Sentinel-1 Product Definition
This document defines the complete Sentinel-1 product family generated by the Sentinel-1 Instrument Processing Facility (IPF). The document also provides a brief overview of the Sentinel-1 instru ...
-
Sentinel-1A TOPS Radiometric Calibration Refinement
Following a calibration campaign that took place during spring/summer 2015, a new processing baseline is in place for all Sentinel-1 Level-1 core user products acquired after 25/11/2015 10:40 UTC ...
-
Sentinel-1 IPF: Impact of the Elevation Antenna Pattern Phase Compensation on the Interferometric Phase Preservation
The Elevation Antenna Patterns (EAPs) used by the S-1 Instrument Processing Facility (IPF) are derived from the S-1 Antenna Model (AM) which is able to predict with great accuracy the gain and ph ...
-
Sentinel-1 SAR Space Packet Protocol Data Unit
Specification for Level-0 products This document gives a comprehensive description of the Sentinel-1 Space Packet on packet layer level. It describes the structure of the packets, provides the data fo ... -
Sentinel-1 Radiometric Calibration of Products
This document defines the procedure to radiometrically calibrate Sentinel-1 Level 1 products generated by the Sentinel-1 IPF.
-
Sentinel 1 SAR Instrument Calibration and Characterisation Plan
This document describes the internal calibration and characterisation activities of the Sentinel-1 C-band SAR instrument.
-
Sentinel-1 Level-0 Product Format Specifications
This document aims to provide the format specifications for Level-0 products generated in the framework of the Sentinel-1 Payload Data Ground Segment (S1 PDGS) project.