Minimize Sentinel-1 Document Library

Sentinel-1B M-Cyclic Performance Report 03 2019

The purpose of this document is to provide a status on the Sentinel-1B sensor and product performance for orbit repeat cycles 99 to 102, covering the period from 6 May to 23 June 2019.

Sentinel-1A N-Cyclic Performance Report 03 2019

The purpose of this document is to provide a status on the Sentinel-1A sensor and product performance for orbit repeat cycles 169 to 172, covering the period from 30 April to 17 June 2019.

Sentinel-1 Ocean Wind Fields (OWI) ATBD

The objective of this document is to define and describe the algorithm implemented in the Sentinel-1 L2 IPF and the processing steps for the generation of the Ocean Wind Field (OWI) component of the Sentinel-1 Level-2 Ocean (OCN) product.

Sentinel-1 Product Specification

This document defines the detailed product format for all Sentinel-1 Level 1 (L1) and Level 2 (L2) products.

For products processed with previous versions of the processor, please refer to Sentinel-1 Product Specification - IPF 2.8.

Sentinel-1 Level 1 Detailed Algorithm Definition

This document describes the processing algorithms employed by the Sentinel-1 Image Processing Facility (IPF) for the generation of Sentinel-1 Level 1 products. The algorithms apply to the processing of Sentinel-1 acquisition modes: Stripmap, Interferometric Wide-swath, Extra-wide-swath and Wave.

Sentinel-1A N-Cyclic Performance Report 02 2019

The purpose of this document is to provide a status on the Sentinel-1A sensor and product performance for orbit repeat cycles 165 to 168, covering the period from 13 March to 30 April 2019.

Sentinel-1A N-Cyclic Performance Report 01 2019

The purpose of this document is to provide a status on the Sentinel1-A sensor and product performance for orbit repeat cycles 161 to 164, covering the period from 24 January to 13 March 2019.

Sentinel-1B N-Cyclic Performance Report 02 2019

The purpose of this document is to provide a status on the Sentinel-1B sensor and product performance for orbit repeat cycles 95 to 98, covering the period from 19 March to 6 May 2019.

Sentinel-1B N-Cyclic Performance Report 01 2019

The purpose of this document is to provide a status on the Sentinel-1B sensor and product performance for orbit repeat cycles 91 to 94, covering the period from 30 January to 19 March 2019.

Sentinel-1A and -1B Annual Performance Report 2018

The purpose of this document is to provide the status of the Sentinel-1A and -1B instrument and product performance for 2018.

Sentinel-1B N-Cyclic Performance Report 08 2018

The purpose of this document is to provide a status on the Sentinel-1B sensor and product performance for orbit repeat cycle 87 to 90, covering the period from 13 December 2018 to 30 January 2019.

Sentinel-1A N-Cyclic Performance Report 08 2018

The purpose of this document is to provide a status on the Sentinel-1A sensor and product performance for orbit repeat cycle 157 to 160, covering the period from 07 December 2018 to 24 January 2019.

Sentinel-1 long duration mutual interference

This technical note describes the long duration mutual interference that has occurred between Sentinel-1 and the Canadian RADARSAT-2 satellite, the Chinese Gaofen 3 satellite and an unknown satellite which operate at the same frequency as Sentinel-1. The mutual interferences are observed on specific locations and times of the orbits and only when both instruments are transmitting simultaneously.

Sentinel-1A and -1B Annual Performance Report 2017

The purpose of this document is to provide the status of the Sentinel-1A and -1B instrument and product performance for 2017.

Sentinel High Level Operations Plan (HLOP)

The Sentinel High Level Operations Plan (HLOP) provides the top level operations plan of the Sentinel missions, including space and ground segment. The HLOP is applicable to all operational entities of Sentinels and Sentinel facilities.

Masking "No-value" pixels on GRD products generated by the Sentinel-1 ESA IPF

This technical note describes an approach for masking the "no-pixel" values for GRD products generated by the Sentinel-1 ESA IPF.

Sentinel-1 IPF Auxiliary Product Specification

This document describes the auxiliary data required by the Sentinel-1 Instrument Processing Facility (IPF) to perform L1 and L2 processing. It defines the content and format of auxiliary data files and provides references for the governing documentation of the auxiliary data files that are beyond the scope of this document and covered by other documents.

Thermal denoising of products generated by the Sentinel-1 IPF

This technical note describes the approach for removing the thermal noise contribution (aka product denoising step).

Sentinel Data Access Report 2016

This report analyses the uptake of Copernicus Sentinel data and the performance of the Sentinel Data Access System during the period 1 December 2015 to 30 November 2016.

Sentinel-1A and -1B Annual Performance Report 2016

The purpose of this document is to provide the status of the Sentinel-1A and -1B instrument and product performance for 2016.

Showing 1 - 20 of 35 results.
of 2