This document aims to provide the end users of Sentinel-1 products a high level description of the evolutions of the Sentinel-1 products related to successive versions of the Sentinel-1 processor (S-1 IPF). It describes the evolutions introduced by each version of the processor. Notice that each version of the IPF includes the features introduced by previous versions.
The purpose of this document is to provide a status on the Sentinel1-A sensor and product performance for orbit repeat cycle 125 on 18 November 2017 to cycle 128 on 5 January 2018.
This document aims to identify and specify the format of the Sentinel-3 SRAL and MWR products for Level-2 Land.
This document describes the auxiliary data required by the Sentinel-1 Instrument Processing Facility (IPF) to perform L1 and L2 processing. It defines the content and format of auxiliary data files and provides references for the governing documentation of the auxiliary data files that are beyond the scope of this document and covered by other documents.
This spreadsheet contains the measured spectral responses for each band of the Sentinel-2 MultiSpectral Instrument (MSI) for the different satellite units. Compared to previous issue (2.0), this new version updates Sentinel-2A spectral responses and changes are mainly modifying the responses for bands B01 and B02.
The purpose of this document is to provide a status on the Sentinel-1B sensor and product performance for orbit repeat cycle 51 on 07 October to cycle 54 on 24 November 2017.
This document aims to identify and specify the format of the Sentinel-3 Synergy products, browse products included.
The purpose of this document is to provide a status on the Sentinel-1 A sensor and product performance for orbit repeat cycle 121 on 01 October to cycle 124 on 18 November 2017.
This technical note describes the approach for removing the thermal noise contribution (aka product denoising step).
This technical note describes the mutual interference that can occur between Sentinel-1 and the Canadian Radarsat-2 satellite which operates at the same frequency as Sentinel-1. The mutual interferences are observed on specific locations and times of the orbits and only when both instruments are transmitting simultaneously.
This document provides description of (1) the respective orbits of Sentinel-1 and Radardat-2 is described in Section 2, and (2) examples of the mutual interference given in Section 3. A list of mutual interferences found at the Mission Performance Centre (MPC) Coordination Centre are given in Appendices of the document.
Showing 11 - 20 of 140 results.
Most Accessed Publications