This document describes methodologies to geocode Copernicus Sentinel-1 images that present themselves in a single 2-D raster radar geometry (slant or ground range). It has been written for ESA ...

The purpose of this document is to provide the status of the Sentinel-1 instrument and product performance for 2021.

The Sentinel High Level Operations Plan (HLOP) provides the top level operations plan of the Sentinel missions, including space and ground segment. The HLOP is applicable to all operational entitie ...

The purpose of this document is to provide the status of the Sentinel-1 instrument and product performance for 2020.

The purpose of this note is to gather in one place all the documentation necessary to decode Sentinel-1 Level-0 products. In addition to the documentation, it provides a sample of Level-0 product w ...

The purpose of this document is to provide the status of the Sentinel-1 instrument and product performance for 2019.

The purpose of this document is to provide the status of the Sentinel-1A and -1B instrument and product performance for 2018.

This technical note describes the long duration mutual interference that has occurred between Sentinel-1 and the Canadian RADARSAT-2 satellite, the Chinese Gaofen 3 satellite and an unknown satel ...

The purpose of this document is to provide the status of the Sentinel-1A and -1B instrument and product performance for 2017.

This technical note describes an approach for masking the "no-pixel" values for GRD products generated by the Sentinel-1 ESA IPF.

This report analyses the uptake of Copernicus Sentinel data and the performance of the Sentinel Data Access System during the period 1 December 2015 to 30 November 2016.

The purpose of this document is to provide the status of the Sentinel-1A and -1B instrument and product performance for 2016.

This document defines the procedure for performing the deramping of Sentinel-1 TOPS IWS and EWS of Level-1 SLC products generated by the Sentinel-1 IPF.

The present technical note discusses the debris collision that occurred on 23rd August 2016 whereby the Sentinel1-A solar panel was struck by a small mm sized particle. The implications for product ...

The purpose of this document is to provide the status on the Sentinel-1A instrument and product performance during 2015.

This document defines the complete Sentinel-1 product family generated by the Sentinel-1 Instrument Processing Facility (IPF). The document also provides a brief overview of the Sentinel-1 instru ...

Following a calibration campaign that took place during spring/summer 2015, a new processing baseline is in place for all Sentinel-1 Level-1 core user products acquired after 25/11/2015 10:40 UTC ...

The Elevation Antenna Patterns (EAPs) used by the S-1 Instrument Processing Facility (IPF) are derived from the S-1 Antenna Model (AM) which is able to predict with great accuracy the gain and ph ...