The document at hand defines the format of the Extended Timing Annotation Dataset (ETAD) for the Sentinel-1 level 1 SLC products. This document is an addendum to the ETAD Product Definition Documen ...

This document provides a status on the S1-A sensor and product performance for orbit repeat cycle 277 to 280.

This document provides a status on the S1-A sensor and product performance for orbit repeat cycle 273 to 276.

This document describes the processing algorithms employed by the Sentinel-1 Image Processing Facility (IPF) for the generation of Sentinel-1 Level 1 products.

The algorithms apply to the p ...

The Sentinel-1 LOP (Level-2 Ocean Processor) is in charge of the generation of the Level-2 Ocean Products (OCN).

The purpose of t ...

This document describes and defines the prototype software for the generation of the Sentinel-1 Ocean Swell Spectra (OSW) component of the OCN product.

The main objective of the document is ...

The objective of this document is to define and describe the algorithm implemented in the Sentinel-1 L2 IPF and the processing steps for the generation of the Ocean Wind Field (OWI) component of th ...

This document describes the algorithm implemented in the S1 L2 IPF for estimating the L2 Doppler and the Radial Velocity (RVL) component of the Sentinel-1 Level-2 Ocean (OCN) product.

This document describes methodologies to geocode Copernicus Sentinel-1 images that present themselves in a single 2-D raster radar geometry (slant or ground range). It has been written for ESA ...

The purpose of this document is to provide the status of the Sentinel-1 instrument and product performance for 2021.

The Sentinel High Level Operations Plan (HLOP) provides the top level operations plan of the Sentinel missions, including space and ground segment. The HLOP is applicable to all operational entitie ...

The purpose of this document is to provide the status of the Sentinel-1 instrument and product performance for 2020.

The purpose of this note is to gather in one place all the documentation necessary to decode Sentinel-1 Level-0 products. In addition to the documentation, it provides a sample of Level-0 product w ...

The purpose of this document is to provide the status of the Sentinel-1 instrument and product performance for 2019.

The purpose of this document is to provide the status of the Sentinel-1A and -1B instrument and product performance for 2018.

This technical note describes the long duration mutual interference that has occurred between Sentinel-1 and the Canadian RADARSAT-2 satellite, the Chinese Gaofen 3 satellite and an unknown satel ...

The purpose of this document is to provide the status of the Sentinel-1A and -1B instrument and product performance for 2017.

This report analyses the uptake of Copernicus Sentinel data and the performance of the Sentinel Data Access System during the period 1 December 2015 to 30 November 2016.

The purpose of this document is to provide the status of the Sentinel-1A and -1B instrument and product performance for 2016.